Proper lubrication of the chassis of the multi-function mixer can reduce the wear of vehicle parts and increase the service life of the mixer parts. However, the following points should be noted when implementing lubrication:
1. Under normal use, lubrication shall be carried out according to the maintenance cycle of the mixer manufacturer, and the maintenance cycle shall be appropriately shortened under harsh conditions.
2. When changing the engine oil, it should be carried out in the hot state to ensure that the oil can be drained. When draining oil, pay attention to check whether the oil color is normal and whether there are foreign matters in the oil, so as to find hidden trouble. After the oil is drained, tighten the foreign matters on the oil drain bolt.
3. The specified lubricating oil shall be selected. The performance of the substitute oil must be close, the main technical indicators must be guaranteed, and the substitute oil should be checked frequently, and the service cycle should be shortened.
4. Change engine oil filter element: when changing engine oil, the engine oil filter shall be replaced at the same time, a thin layer of oil shall be coated on the sealing gasket, and the filter shall be fastened.
The above is a detailed introduction of the manufacturer of self feeding concrete mixing tank truck. I hope it will be helpful to you. If you have any questions, please contact us. We will provide you with professional services http://www.servimetrol.com/