The automatic feeding mixer integrates feeding and mixing, saving manpower and material resources, and is widely used. If there are materials in the automatic feeding mixer, the mixing cannot be stopped to prevent the materials from solidifying. Many customers have encountered the phenomenon that the mixing shaft stops rotating during the use of the self feeding concrete mixer. What are the reasons for this? The following section explains why the mixing shaft stops rotating:
Reasons and Solutions for Stopping Rotation of Mixing Shaft of Self feeding Mixer Truck
During the production process, it is abnormal for the concrete to stop rotating from the mixing shaft of the loading mixer or rotate slowly. If this happens, stop the machine first to check whether the following three conditions occur.
1. Is the motor drive belt loose?
The loose motor drive belt of self mixing concrete mixer can also cause the mixing shaft of commercial concrete mixer to rotate slowly or stop rotating, and the loose motor drive belt can cause insufficient power transmission.
2. Is there any serious overload?
If the mixing shaft of self mixing concrete mixer exceeds the normal working load, the mixing shaft will rotate slowly. If the load is too large, the mixing shaft will stop or bend.
3. Is there any large foreign matter between the mixing blade or side blade and the inner wall of the cylinder?
In this case, the mixing shaft of the automatic concrete feeding mixer will stop rotating or rotate slowly. Large foreign matters between the mixing blades or side blades and the inner wall of the tank will also cause the mixing shaft to stop. The reason why foreign matters can be stuck is that the clearance between the mixing blades or side blades and the inner wall of the tank is too large, especially stones.
The above is a detailed introduction to the fully automatic self loading mixer, and I hope it will be helpful to you. If you have any questions, please contact us. We will provide you with our attitude http://www.servimetrol.com/